Home » products » Weighing Instrumentations » Weight Transmitters » DAT 500


DAT 500

20/2012

Weighing Instrumentations Weight Transmitters

Weighing Instrumentations

Weight Transmitters



  • RS232 or RS422/RS485 output, ASCII Protocols or MODBUS RTU 
  • High performance and reliability
  • Bipolar version ± 10V
  • Upload and download function for programming with 1006 TESTER

  • Directly connectable to PROFIBUS Fieldbus and to DEVICENET with optional internal board
  • The connection can also be done through the external converter
  • 10 points linearization
  • Calibration done using certificates of transducers
  • Configuration and calibration from the front panel or PC via the USB serial port, RS232/RS485 with the program INNOVATION™ (MS Windows)
  • IP54 protection (front panel)

TECHNICAL CHARACTERISTICS DAT 500

Trasducer input voltage: 5 V (max 6 load cells 350 Ohm)
Measuring range: -0.5÷+3..5 mV/V (-3.9÷+3.9 mV/V optional)
Input sensitivity: 0.02 µV/ per count
Linearity: <0.01% of full scale
Gain drift: <0.001% full scale/ °C
Display: 6 digit, red LED (7 segments), h 14 mm
LED status: 4 red
A/D Converter: 24 bit
Resolution: > 16.000.000 counts
Visible resolution: 60.000 divisions displayable on net weight
Divisions value (adjustable): x1, x2, x5
Set decimal: 0.0 ; 0.00 ; 0.000
Filter: 0.1 ÷ 25 Hz adjustable
Keyboard: 4 tactile feedback buttons
Tool voltage: 24 V c.c. ±15% - power 5 W
Temperature range: -10 ÷ +50 °C
Storage temperature: -20 ÷ +70 °C
Logic output: 2 relays (clean contact) MAX 24 V c.c./100 mA cad.
Logic input: 2 optoisolated 24 V c.c. PNP (External voltage)
Serial door: USB, RS232C or RS422/RS485 with ASCII or Modbus RTU protocols
Transmission distance: 15m (RS232C), 1000m (RS422 e RS485)
FIELDBUS protocol: PROFIBUS, DEVICENET (opzional)
Others fieldbus comunication: CANopen, Modbus-Plus, Ethernet and other
Peak Hold function: for dynamic measures
Baud rate: 2400, 9600, 19200, 38400, 115200 adjustable
Analogic optional output: optoisolated 16 Bit Tension: 0÷5/10V (R min10 K Ohm) Current: 0/4÷20mA (R max 300 Ohm)
Regulatory compliance: EN61326-1, EN55011 and EN55014 for EMC; EN61010-1 for electrical security
Electrical connection: Terminal screw pass 5 mm
Dimensions and weight: 96 x 48 x 120 mm (L x H x D); 250 g
Drilling template: 92 x 45 mm (L x H)
BCD output: optional

Accessories are not to be considered included in the price of each product.
All the above is purely illustrative and not to be understood demanding towards Pavone Sistemi