MC 353

20/2012

Dynamic Weighing Flow Regulator For Belt and loss in weight touch

Dynamic Weighing

Flow Regulator For Belt and loss in weight touch

Request Manual

A PHP Error was encountered

Severity: Warning

Message: Undefined property: stdClass::$SchedaTecnica

Filename: views/dettaglio_prodotto.php

Line Number: 59

TECHNICAL CHARACTERISTICS MC 353

Trasducer input voltage:	5 Vdc / 120 mA (max 8 load cells 350 Ohms)
Tool voltage:	24 Vdc 10 W
Temperature range:	-10 ÷ +50°C
Storage temperature:	-20 / +60°C
Degree of protection:	IP65
Measuring range:	7,8 mV/V
Input sensitivity:	0.02 µV/ per count
Linearity:	<0.01% of full scale
Gain drift:	<0.0003% of full scale/°C
Display:	LCD 5.2” (visible area 118mm x 58mm) (l x h)
LED status:	white, adjustable intensity
A/D Converter:	24 bit
Internal resolution:	16.777.216 counts
Visible resolution:	10.000 visible division on net weight
Divisions value (adjustable):	0.001 ÷ 50
Filter:	adjustable 0.2 ÷ 50 Hz
Serial door:	RS232, RS422, RS485
Baud rate:	1200 ÷ 115200 adjustable
Transmission distance:	15m (RS232C), 1000m (RS422 and RS485)
FIELDBUS protocol:	Profibus DP-V1, baud rate da 9,6 K/sec a 12 Mbit/sec ETHERNET TCP/IP, UDP, ARP, ICMP, ModBus/TCP
Regulatory compliance:	EN61000-6-2, EN61000-6-3, EN61010-1, EN45501
Electrical connection:	Terminal screw pass 5.08 mm

Accessories are not to be considered included in the price of each product.
All the above is purely illustrative and not to be understood demanding towardsPrecise Instrument Corporation