Home » products » Accessories » Tester 1006 » TESTER 1006
Accessories
Tester 1006
| Power transducers: | 5 VDC / 60 mA (max 4 350 Ohm load cells in parallel) |
| Measuring range: | from -3.9 to +3.9 mV / V |
| Linearity: | <0.01% of full scale |
| Thermal drift: | <0.001% of full scale / °C |
| Display: | Graphical 3 " |
| A/D converter: | 24 bits |
| Internal resolution: | > Of 16,000,000 points |
| Displayable Resolution: | 50,000 divisions |
| Value division (selectable): | x1, x2, x5 |
| Decimal set: | 0,0 ; 0,00 ; 0,000 |
| Keyboard: | 16 keys + on/off |
| Power supply instrument: | 4 AA batteries - Power consumption 5 W |
| Consumption: | 125 ÷ 190 mA |
| Battery life: | about 4 hours with alkaline batteries, about 8 hours with rechargeable Ni-MH 1.2 V (2000 mAh) |
| Operating temperature: | -10 To +50 ° C (max 85% humidity non-condensing) |
| Storage Temperature: | -20 ÷ +70 °C |
| Degree of protection: | IP54 |
| Weight: | 500 g |
| Connections to the load cells: | 25-pin D-sub connector and cable length 2m |
| Connections to the instruments: | 25-pin D-sub connector and cable length 0.5 m |
| CALIBRATOR | |
| Accuracy: | 0.033% of F.S. |
| Voltage power cell: | 3 to 12 VDC |
| Signal: | -3 ÷ +20.3 mV |
| Impedance: | Selectable 350/700 Ohms, or set 300 to 4500 Ohms |
facebook
twitter
linkedin
add this