Home » products » Weighing Inst. » Weight Transmitters » A.D. SYSTEM
Weighing Inst.
Weight Transmitters
| Power supply: | 5 V (shortcircuit protected) |
| Measuring range: | from -1.0 to +3.5 mV/V |
| Input sensitivity: | 0.02 micronV/division |
| Linearity: | ± 0.01% F.S. |
| Thermal drift: | ± 0.001% F.S./°C |
| Display: | LCD, alphanumeric |
| A/D converter: | 24 bits (over 16 million of divisions) |
| A/D conversion speed: | from 6 to 12 updates per second on each cell (depends on the n ° of cells) |
| Filter: | selectable from 0.1 to 25 Hz |
| Calibration: | with test certificates, sample table |
| Keyboard: | 4 membrane keys |
| Power supply: | 24 VDC ± 15% - Power consumption 10W |
| Temperature range: | -10 ÷ +50 °C |
| Storage temperature: | -20 ÷ +70 °C |
| Logic outputs: | 2 relays (dry contacts NA) -115 Vac/30 Vdc 0.5 A |
| Logic inputs: | 2 opto-isolated 24 VDC PNP |
| Serial port: | RS232 or RS422/RS485 |
| Transmission distance: | 15m (RS232C), 1000m (RS422 and RS485) |
| Protocol to fieldbus: | PROFIBUS, DEVICENET, ETHERNET (opzionals) |
| Standard protocol: | ASCII, MODBUS RTU |
| Baud rate: | 1200÷115200 selectable |
| Optional analog output: | optically isolated 16-bit. Voltage: 0 to 5/10V (R min10 K Ohm). Current: 0/4 to 20mA (R max 300 Ohm) |
| Regulatory Compliance: | EN61000-6-2, EN61000-6-3 |
facebook
twitter
linkedin
add this