Home » products » Weighing Inst. » New Products » DAT 1400 DEVICENET
Severity: Warning
Message: Undefined property: stdClass::$SchedaTecnica
Filename: views/dettaglio_prodotto.php
Line Number: 40
Weighing Inst.
New Products
Severity: Warning
Message: Undefined property: stdClass::$SchedaTecnica
Filename: views/dettaglio_prodotto.php
Line Number: 59
| Power supply: | 5 Vdc (max 8 -350 Ohm- load cells) |
| Measuring range: | -3.9 ÷ +3.9 mV/V |
| Input sensitivity: | 0.02 micronV min |
| Linearity: | < 0.01% FS |
| Temperature drift: | < 0.001% FS/ °C |
| Display: | 6 digit, 7-segment LED red, height 14mm |
| A/D converter: | 24 bit |
| Internal resolution: | > di 16.000.000 points |
| Frequency signal acquisition: | 12 ÷ 1000 Hz |
| Displayable resolution: | 999.999 displayable divisions on net weight |
| Value divisions (selectable): | x1, x2, x5, x10, x20, x50 |
| Decimals setting: | 0.0 ; 0.00 ; 0.000; 0.0000 |
| Filter: | Selectable 0.5 to 1000 Hz |
| Keybord: | capacitive, 4 keys |
| Instrument power supply: | 12-24 Vdc ± 15% - Power consumption 5 W |
| Operating temperature: | -10/+ 50 ° C (humidity max 85% no condensation) |
| Storage temperature: | -20/+70°C |
| Logic outputs: | 2 opto-isolated; MAX 24 Vdc/100 mA each |
| Logic inputs: | 2 opto-isolated 24 Vdc PNP (external power supply) |
| Serial ports: | 1 USB device + 1 RS232C + 1 RS485/Fieldbus |
| Peak Hold function: | for dynamic measurements |
| Optional analogue output: | optoisolated 16-Bit Voltage: 0 to 5/10 V (R min10 K Ohm), Current: 0/4 to 20 mA (R max 300 Ohm) |
| Analog output linearity: | < 0,02% FS |
| Temperature drift analog output: | 0,001% FS / °C |
| Microcontroller: | ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard from USB |
| Data storage: | 64 Kbytes expandable up to 1024 Kbytes |
| Regulatory Compliance: | EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety |
| Electrical connections: | 5 mm terminal blocks, removable |
facebook
twitter
linkedin
add this