Home » products » Weighing Inst. » Weight Transmitters » DAT 100/RS485
Weighing Inst.
Weight Transmitters
| Trasducer input voltage: | 4 V (max 4 cells 350 Ohm) |
| Measuring range: | –4 ÷ +4 mV/V |
| Rated load (R.L.): | 0.02 V/division |
| Linearity: | < 0.01% FS |
| Gain drift: | < 0.001% FS/°C |
| Display: | 5 digit, red LED (7 segments), h 7 mm |
| LED status: | 2 red |
| D/A convertitor: | 24 bit |
| Internal resolution: | 16.000.000 counts |
| Visible resolution: | 60.000 division visible on net weight |
| Divisions value (adjustable): | 0.001÷50 |
| Filter: | 0.2÷25 Hz adjustable |
| Keyboard: | 3 mechanic buttons (under the red window) |
| Tool voltage: | 24 V c.c. ±10% – power 2 W |
| Temperature range: | -10 ÷ +50°C |
| Storage Temperature: | -20 ÷ +60°C |
| Logic output: | 2 Solid-state relays, (maximum load 24 Vdc / 100 mA each) |
| Logic input: | 2 optoisolated 24 V c.c. PNP (External voltage) |
| Serial door: | RS232C half duplex with ASCII or Modbus RTU protocol, RS485 full duplex with ASCII or Modbus RTU protocol |
| Baud rate: | 2400 ÷ 115200 adjustable |
| Trasmission distance: | 15 m (RS232); 1000 m (RS485) |
| Regulatory compliance: | EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for electrical security |
| Electrical connection: | Terminal screw pass 5.08 mm |
facebook
twitter
linkedin
add this