PSVIS HE 100

20/2012

Weighing Inst. Weight Indicators

Weighing Inst.

Weight Indicators

Request Manual

A PHP Error was encountered

Severity: Warning

Message: Undefined property: stdClass::$SchedaTecnica

Filename: views/dettaglio_prodotto.php

Line Number: 59

TECHNICAL CHARACTERISTICS PSVIS HE 100

Recommended input:	100 ÷ 240 Vca 50/60 Hz - 25 W
Temperature range:	-10°C ÷ +40°C
Storage temperature:	-20°C ÷ +50°C
Display:	5 alphanumeric digits of 5 x 7 LED red. LED Surface: 460 x 100 mm Available in a kit including 8-digit (LED surface 780 x 100 mm)
Display brightness:	Anti-glare filter and automatic brightness depending on ambient light, suitable for installation even in direct sunlight
Visible data:	Weight gained by load cells or analog input 0 to 10 V or 4 to 20 mA; alphanumeric indications and programming menu
Radio control functions:	Tare, zero balance, serial transmission current weight, configuration and calibration
Dimensions:	500 x 185 x 115 mm ( L x H x D )
Mounting:	On wall with 4 side holes outside Ø 6.5 mm with 510 x 155 mm (W x H)
Container:	Stainless steel protect against dust
Electrical connection:	Sealed circular connectors, with wiring conductors with screw terminals
Trasducer input voltage:	5 V (max 8 load cells 350 Ohms)
Linearity:	<0.01% R.O.
Thermic drift (Load cell):	<0.0003% R.O./°C
Thermic drift (Input):	<0.001% R.O./°C
Internal resolution:	24 bit
Visible resolution:	> 60.000 divisions
Measuring range:	-1.5 ÷ +3.5 mV/V
Acquisition frequency:	6 ÷ 25 Hz
Filter:	0.2 Hz ÷ 25 Hz adjustable
Set decimal:	0 ÷ 3 decimal figures
Serial door:	RS232C / RS422 / RS485
Transmission distance:	15m (RS232) e 1000m (RS422/RS485)
Protocol:	ASCII + Programmable custom protocols
Baud rate:	1200 ÷ 115200 adjustable
Options:	Ethernet and Profibus DP protocols
Regulatory compliance:	EN61000-6-2, EN61000-6-3, EN61010-1

Accessories are not to be considered included in the price of each product.
All the above is purely illustrative and not to be understood demanding towardsPrecise Instrument Corporation