Home » products » Dynamic Weighing » Microcontroller for Screw Conveyors » MC 352
Dynamic Weighing
Microcontroller for Screw Conveyors
Trasducer input voltage: | 5 Vdc / 90 mA ; max 6 (350 Ohm) |
Measuring range: | -3.9 ÷ +3.9 mV/V |
Input sensitivity: | 0.2 microV/ per counts |
Linearity: | <0.01% of full scale |
Gain drift: | <0.001% of full scale/°C |
Display: | LCD alphanumeric backlit 16 x 2 scripts |
A/D Converter: | 24 bit |
Visible resolution: | 60.000 divisions displayable on net weight |
Divisions value (adjustable): | x1, x2, x5, x10 |
Tool voltage: | 230 (115) Vac 50-60 Hz ; 15 VA |
Temperature range: | -10 ÷ +50°C |
Storage temperature: | -20 ÷ +70°C |
Logic output: | 6 relays (NA) MAX 115 Vac /30 Vdc 0.5 A cad. |
Logic input: | 8 optoisolated 12 / 24 Vcc PNP |
Analog optional output: | 0÷10 V, 0÷5 V, 0÷20 mA, 16 bit; R (V)>10 K Ohms, (I)<300 Ohms |
Serial door: | COM1: RS232 half duplex; COM2: RS422/RS485 half duplex |
Transmission distance: | 15m (RS232C), 1000m (RS422 and RS485) |
Protocol: | Modbus RTU |
Baud rate: | 9600 RS232 - 38400 RS485 |
Regulatory compliance: | EN50081-1 and EN50082-2 for EMC EN61010-1 and electrical security |
Dimensions: | 144 x 72 x 120 mm (L x H x D) |
Drilling template: | 139 x 67 mm (L x H) |
Degree of protection: | IP54 |
Electrical connection: | Removable screw terminal 5.08mm pitch (power 7.5); serial ports on 9 pin SUB-D connector |
Fieldbus: | Profibus DP external mounting on DIN guide |